Construction Chemicals
Powders, fibres and liquid chemistries for concrete, mortar, waterproofing, flooring and repair—where strength, weight, workability, protection and finish are decided.
Every property
has a place in
the formulation.
Construction performance is designed before the pour. Geocon connects functional fillers, polymers, fibres and surface additives to the realities of mixing, placing, curing and service life.
Four routes
into the right
solution.
Concrete &
Admixtures
Strength, density, rheology, set control and reinforcement.
Waterproofing
Integral and surface technologies for lower ingress and longer life.
Flooring &
Finishes
Flow, levelling, gloss, defoaming and stain resistance.
Repair &
Reinforcement
Bond, flexibility, crack control and mechanical durability.
Eleven ways
to build
performance.
High Reactivity
Metakaolin
Boost strength and density while reducing permeability and improving sulfate and chloride resistance.
Hollow Glass
Microspheres
Reduce weight and add insulation value in lightweight concrete, plasters, mortars and syntactic systems.
Latex
Improve adhesion, flexibility and crack resistance in repair mortars, screeds and cementitious coatings.
Ceramic Microspheres
Enhance hardness, abrasion resistance, thermal stability and mechanical durability.
Glass Fibres
Control shrinkage cracking and improve tensile, flexural and impact performance.
Polymer Gel
Retain water, limit segregation and bleeding, and build cohesion in pumped or sprayed mortars.
Waterproofing Chemicals
Reduce absorption and permeability to manage moisture, efflorescence and freeze–thaw exposure.
Stain Resistant Additives
Repel oils, grease and contaminants while retaining the surface character and breathability.
Levelling Agents
for Epoxy Floors
Promote flow-out and self-levelling while reducing trowel marks, craters and pinholes.
Gloss Enhancers
Raise gloss and image clarity in polymer flooring without sacrificing abrasion or chemical resistance.
Defoamers
Release entrained air to reduce pinholes, voids, weak spots and application defects.
Mix-to-
performance
pathway.
Dose
Set the addition level against total binder, resin or system mass.
Disperse
Match addition order and shear to the chemistry and physical form.
Place
Verify flow, pumpability, sag resistance and working time.
Cure
Confirm strength development, bond and moisture response.
Protect
Validate durability against water, chemicals, abrasion and stains.
From
structural
concrete to
the final floor.
Formulation support beyond the data sheet.
Product Selection
Shortlist chemistry and grade by binder, resin, density, exposure and processing needs.
Dosage & Compatibility
Define starting dosage, addition sequence and compatibility checks for the formulation.
Performance Review
Review workability, cure, strength, adhesion, water resistance and surface finish.
Need Our Services?
Call: +91 97695 93030
Work Hours
Mon – Sat: 9:00 AM – 6:00 PM IST
Email Us
support@geoconproducts.com